Skip to main content
Personal Cleaner Haute-SavoiePersonal CleanerHaute-Savoie
Back to resources

Resources

Keeping Ventilation Grilles Clear

Reading · 2 min

Generated editorial illustration; not a photograph of a client visit.
Generated editorial illustration; not a photograph of a client visit.

In modern homes, mechanical ventilation is vital for moisture control and structural preservation. An obstructed extraction vent leads to condensation, wall damage, and poor indoor air quality that can affect your comfort and health.

Cleaning Surface Grilles

Carefully remove the plastic grille from the extraction vent without forcing the clips. Vacuum the dust accumulated on the fins using a soft brush attachment, then wash the grille with warm soapy water. Ensure it is completely dry before reinstalling it to prevent immediate dust buildup.

Do not spray cleaning agents or water directly into the duct. Liquid sprayed inside causes dust to clump within the pipes, which permanently reduces airflow and system efficiency. Over time, this buildup can become a fire hazard or a breeding ground for bacteria.

Testing Airflow Efficiency

Test the ventilation by placing a single sheet of toilet paper against the grille. If the suction holds the paper in place, the system is drawing air correctly; otherwise, the circuit is likely blocked, or the central motor is failing to provide enough negative pressure.

Never attempt to disassemble the motor unit or modify the electrical wiring yourself. Ventilation systems must remain powered on 24/7 to ensure continuous air renewal in wet rooms, preventing the buildup of VOCs and excess humidity that damages paint and plaster.

Clearing Air Intake Vents

Check that the air intakes located above window frames are not blocked by heavy curtains or intentionally sealed by occupants. The mechanical system requires this constant inflow of fresh air to effectively push out humid air through the extraction points in the bathroom.

Dust these intake strips regularly to keep the air paths open. A clean intake prevents annoying whistling sounds during windy weather and ensures a safe air balance, which is critical if you have any gas-powered appliances or fireplaces in the home.

Identifying Major Failures

If mirrors remain fogged up for more than 15 minutes after a hot shower, the ventilation rate is insufficient. Do not insert long objects, wires, or brushes into the ductwork to try to clear a blockage, as you could easily puncture the flexible ducting used in most homes.

Contact a specialist technician if the system makes a metallic grinding noise or if no suction is detected at all. Professional maintenance is required periodically to clean the main horizontal ducts and the roof-mounted fans that are inaccessible to residents.

Maintaining clean and unobstructed ventilation is the only effective way to permanently prevent mold growth and ensure a healthy indoor climate.

Each home has its specifics. A first exchange helps understand your needs before any intervention.

Get in touchQuestion about this article? WhatsApp

Resources

Continue reading